Janome 9102D -, Инструкция, Страница: 38 / 88

36
(A) (B)
• Threading the Upper Looper
Place a spool of thread on the spool pin second from
the right.
*
The points to thread for upper looper are marked
in red.
*
A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide second
from the right from back to front: (A)
1
Thread guide
2. Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
2
Thread guide plate
1
3
1
2
1
2
*
If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: (B)
6
2
4
5
7
1 2 4 3