Janome 712T, Инструкция

Страница: 14 / 32

13
1 ~ 4
0.3
~ 4
0.5
~ 2
1 ~ 3
S. S.
2 ~ 3
•
Pattern Selector Dial
•
Stitch Length Dial
When sewing stretch stitch, set the
length dial at “S.S.”.
If forward and reverse feeds become
unbalanced due to the type of fabric,
correct the balance as follows:
When patterns are compressed,
correct it by turning the dial in the
direction
q
so that the setting mark
indicates “S.S.” to “+” .
When patterns are drawn out,
correct it by turning the dial in the
direction
w
so that the setting mark
indicates “S.S.” to “–”.
*
Selecting Stretch Stitch Patterns
The higher the number, the longer
the stitch length.
You can select the suitable stitch
length for most fabrics.
*
Selecting Stitch Length
Setting mark
Turn the handwheel with
your hand until the tip of
needle is out of fabric.
Select the stitch by turning
the pattern selector dial.
Pattern
Stitch length
dial
Stretch stitch
patterns
NOTE: Do not turn the pattern selector dial while needle is in
material.
Stitch length
dial
q w