Janome 712T, Инструкция

Страница: 11 / 32

10
q
w
e
q
Place the bobbin in the
bobbin holder with the
thread end unwinding in the
clockwise direction.
w
Guide the thread into the
notch “A” on the front side
of the bobbin holder.
Draw the thread to the left,
sliding it between the
tension spring blades.
r
Close the slide plate.
Check the threading by
referring to the chart shown
on the slide plate.
e
Continue to draw the
thread lightly until the
thread slips into notch “B”.
Pull out about 15 cm (6˝) of
thread.
•
Inserting the Bobbin
r
Threading chart