Janome 659, Руководство по обслуживанию

Страница: 21 / 25

BUTTON HOLE FUNCTION (1)
A buttonhole standard length is 3mm longer than the actual button. The length can be adjusted
as follows:
Adjustment procedure:
1 Lower the feed dog and attach buttonhole foot (R). Then lower the foot (R).
2. Open the face cover.
3. Loosen set screw (A).
4. Pull down the buttonhole lever (E) until it touches buttonhole foot (R).
The lever (B) should touch the front base plate (F). Also, make sure buttonhole lever
adjusting plate (C) touches finger (D).
Tighten set screw (A).
5. Raise the feed dog and sew a buttonhole.
Loosen the set screw (A) and turn the buttonhole lever adjusting plate (C) in the direction of
:
(G) if the buttonhole is too short.
(H) if the buttonhole is too long.
20