Janome 219S, Инструкция по эксплуатации

Страница: 18 / 30

16
q
e
r
w
t
q
q
Guide lines
w
Cornering guide
e
Needle plate
r
Center needle position
t
Distance between the center needle position and line
20
1.3 1.6 1.9
6/8˝ 5/8˝ 4/8˝ 3/8˝
2.0 1.5 1.0
Number
Centimeters (cm)
10 15
1.0
Turn a Square Corner
Cornering guide
To turn a square corner 5/8” (1.6 cm) from the fabric
edge.
1. Stop stitching and lower the needle by turning
the handwheel counterclockwise.
2. Raise the presser foot and turn the fabric to line
the edge with the 5/8” (1.6 cm) seam guide.
3. Lower the presser foot and begin stitching in the
new direction.
Line up the fabric edge facing you with the
cornering guide shown.
1
Seam Guide Line
The numbers on the needle plate indicate the distance
between the center needle position and the line
r
.
The numbers in front are centimeters.
The numbers in back are fractions of an inch.