janitza ProData 2, Инструкция по эксплуатации и технические данные

Страница: 19 / 56

19
ProData II
Ethernet interface
The Ethernet network settings should be specified
by the network administrator and set accordingly
on the ProData 2 using the GridVis software.
If the network settings are not known, the ProData 2 may
not be integrated into the network via the patch cable.
m
Caution!
Connection of the ProData 2 to the Ethernet
may only be carried out after discussion
with the network administrator.
PC / Switch
Ethernet
Connection
LEDs of the Ethernet interface
LED Function
Yellow Illuminates when a connection (LINK)
is present.
Green Illuminates sporadically when
a network activity occurs.
m
Caution!
The ProData 2 is factory-set to the fixed
IP address
10.10.10.200
(subnet mask
255.0.0.0). The allocation of a dynamic IP
address is disabled.
The settings can be changed via a suitable
Ethernet connection using the GridVis
software.