9
www.janitza.de
Procont
®
-LMC-008-IO
WARNING
Risk of injury due to electrical voltage!
Severe bodily injury or death can result! Therefore
please abide by the following:
·Switch off your installation before commenc-
ing work! Secure it against being switched on!
Check to be sure it is de-energized! Ground and
short circuit! Cover or block off adjacent live
parts!
·During operation and troubleshooting (espe-
cially for DIN rail devices), check your system
for dangerous voltages and switch these off if
necessary!
·Wear protective clothing and protective equip-
ment in accordance with applicable guidelines
when working on electrical systems!
·Before making connections to the device/the
component, ground the device by means of the
ground wire connection, if present.
·Do not touching bare or stripped leads that are
energized! Equip stranded conductors with wire
ferrules!
·Hazardous voltages can be present in all circuit-
ry parts that are connected to the power supply.
·Protect wires, cables and devices with a suitable
line circuit breaker/fuse!
·Never switch off, remove or tamper with safety
devices!
·There can still be hazardous voltages present
in the device or in the component even after it
has been disconnected from the supply voltage
(capacitor storage).
·Do not operate equipment with current trans-
former circuits when open.
·Only connect screw terminals with the same
number of poles and design!
·Do not exceed the limit values specified in the
user manual and on the rating plate! This must
also be observed during testing and commis-
sioning.
·Take note of the safety and warning notices in
the documents that belong to the device!
2.4
Dangers when handling the device
When operating electric devices, it is unavoid-
able for certain parts of these devices to conduct
hazardous voltage. Consequently, severe bodily
injury or material damage can occur if they are not
handled properly.
Therefore, when handling our devices, always
observe the following:
·do not exceed the limit values specified in the
user manual and on the rating plate! This must
also be observed during testing and commission-
ing!
·Take note of the safety and warning notices in all
usage information that belongs to the device!
WARNING
Disregarding the connection conditions of the
Janitza measurement devices or their compo-
nents can lead to injuries and even death or to
material damage!
• Do not use Janitza measurement devices or
components for critical switching, control or pro-
tection applications where the safety of persons
and property depends on this function.
• Do not carry out switching operations with the
Janitza measurement devices or components
without prior inspection by your plant manager
with specialist knowledge! In particular, the safe-
ty of persons, material assets and the applicable
standards must be taken into account!
