janitza 96-PA-RCM-EL, Руководство пользователя и технические характеристики

Страница: 34 / 48

Module 96-PA-RCM / 96-PA-RCM-EL
www.janitza.de
34
Fig. Window Measurement > Module mode “Residual current”
B
1
2
3
4
Fig. Window Display “Residual current” with the
settings of the parameters for the measuring modes
Residual current.
No.
Residual current
parameters
Settings
1
Analog CH 1
type,
I5 terminal 29/30
Suitable transformer types:
·AC (0 .. 30 A
rms
)
·0 .. 20 mA
·4 .. 20 mA
2
Analog CH 2
type,
I6 terminal 31/32
Suitable transformer types:
·AC (0 .. 30 A
rms
)
·0 .. 20 mA
·4 .. 20 mA
3
Transformer
ratios
Current transformer:
·CH 1 - prim. and sec.
·CH 2 - prim. and sec.
4
Cable break
detection
Configurable in the GridVis
®
software and in the Modbus
editor (basic device).
Tab. Settings options in the residual current module mode
2. Module mode DC power
9.2 Module mode
The
Module mode
item in the Measurement
window is for switching the measurement modes
1.
Residual current
or
2.
DC power.
1. Module mode Residual current
·Use buttons 3/4 (
“

”/“

”
) to select the item
Module mode and confirm with button 6 Enter.
·The measuring mode set is displayed in yellow
(default setting Residual current ).
·If necessary, use buttons 3/4 (
“

”/“

”
) to select
the item Residual current and confirm with
button 6 Enter .
·Afterwards, in the Measurement window, select
the item Residual current and confirm with
button 6, Enter .
·The window Display “Residual current” appears
with the parameters to be set:
·Use buttons 3/4 (
“

”/“

”
) to select the item
Module mode and confirm with button 6 Enter.
·The measuring mode set is displayed in yellow.
·Use buttons 3/4 (
“

”/“

”
) to select the item DC
power and confirm with button 6 Enter .
·Afterwards, in the Measurement window, select
the item DC power .
Fig. Window Measurement > Module mode “DC power”
·To go to the Display window with the parameters
for the DC power measurement modes to be set,
press button 6 Enter .