janitza 800-CON, Руководство пользователя и технические данные

Страница: 14 / 28

800-CON Modules
www.janitza.com
14
Quan-
tity
Part. no. Designation
1 52.31.210
800-CON module - Transfer module
(set of 2)
1 52.31.208 Bus connector - Transfer on right
1 52.31.209 Bus connector - Transfer on left
2 10.02.188 Shield clamps
2 10.01.953 End bracket
1 33.03.379
Installation instructions (DE/EN)
"Transfer modules for the UMG 801"
1 33.03.342
"Safety information” supplement
(12 languages)
1 33.03.059 “Mounting” supplement
2 10.01.938 Screw terminal, plug-in, 8-pole
Tab. Scope of delivery, 800-CON transfer module
3.8 Scope of delivery, 800-CON transfer module
(set of 2)
INFORMATION
·The modules are delivered with the necessary
screw terminals and bus connectors (JanBus in-
terface) for connection to the basic device or other
modules.
·All supplied options and design variants are de-
scribed on the delivery note.
Quan-
tity
Part. no. Designation
1 08.02.451
Data cable for connecting the
"transfer modules" (1000 mm -
pre-assembled, twisted pair data
cable)
1 08.02.452
Data cable for connecting the
"transfer modules" (225 mm -
pre-assembled, stranded twisted
pair hook-up wires)
Tab. Accessories
3.9 Accessories “800-CON transfer module”
3.10 Operating concept
The UMG 800-CON (set of 2) expansion and transfer
module is used for connecting remote measurement
points as previously described in Sect. “3.1 800-
CON module (set of 2)” on p. 12.
The modules can be used to realize meter and mod-
ule topologies with a flexible arrangement of the DIN
rails. For the operation of the devices, components
and modules integrated in your meter and module
topology, please refer to the respective additional
usage information.
3.11 GridVis
®
network analysis software
With the GridVis
®
software, you have the perfect tool
for programming, reading out and visualizing mea-
surement data (download at www.janitza.com).
Performance characteristics of the GridVis
®
soft-
ware
·Configuration of the basic device and the modules
of your meter and module topology.
·Graphic display of measured values.
·Online help and tutorials.
Connections to the PC (GridVis
®
software)
Information on connections for communication
between the PC and the basic device (with modules)
can be found in the usage information of the basic
device.
INFORMATION
Please refer to the user manual of the UMG 801
basic device for the operation, configuration and
readout of expansion modules.
This user manual describes the modules and pro-
vides information on the operation of the modules via
the basic device (UMG 801).
The GridVis
®
software has an online help with tutori-
als.