JANE Be Cool Twister, Руководство пользователя

Страница: 63 / 132

EN
63
Important ! Do not use the enhanced child seat facing
forwards if your child is under 76cm/15months old.
To disassemble your baby and the child seat, repeat
the above prescribed procedures in reverse order.
2.7 Securing your child in the enhanced child seat
Forward Facing: Child height 100cm-150cm
Recline position: position 1
Step 1: Remove the crotch pad and shoulder pad and
conceal shoulder straps, crotch strap and buckle
before installing for children (See details 5.1)
Step 2: Fold and push the support leg back to the
bottom of the child seat until it locks in place.(Retract
the support leg see details 4.7.
Step 3: Place the child seat on the enhanced child seat
forward-facing and press the ISOFIX release button on
both sides of the seat and push the ISOFIX connectors
forward and make the ISOFIX connectors fully extended.
This ensures that both hooks on the ISOFIX connectors
are open and ready to use, now the ISOFIX indicator of
ISOFIX release button show red color.
Step 4: Push the ISOFIX connectors directly into the
anchorages until heard an audible sound “click”. Now
the ISOFIX indicator of ISOFIX release button show
green color.
Step 5: Grasp the seat body and base to check the seat
if it is fastened tightly or shakes. If the seat shakes and
the ISOFIX connectors are pulled out, please repeat
the above steps and install it again.
Step 6: Place your child into the enhanced child seat.
Adjust the headrest height according to the height of
your child if necessary. Guide the diagonal belt into
the top belt guide hook under the headrest near to
the side of the car seat belt automatic roll-up device.
Guide lap belt through both belts guide hook’s of on
the both sides of the seat body.