Section 7. Product Specifications and Technical Data
7.1 Replacement Parts List
To order or purchase parts for Zodiac
®
pumps, contact your nearest Zodiac dealer. If they cannot supply you with what
you need, contact Zodiac technical support at 800.822.7933 or send an e-mail message to:
.
Key No.
Description
Model No. (HP)
Order Part No.
1
Single-speed Motor & Hardware, SHPF
.50
R0445114
1
Single-speed Motor & Hardware, SHPF
.75
R0445101
1
Single-speed Motor & Hardware, SHPF
1.0
R0445102
1
Single-speed Motor & Hardware, SHPF
1.5
R0445103
1
Single-speed Motor & Hardware, SHPF
2.0
R0445104
1
Single-speed Motor & Hardware, SHPF
3.0
R0445105
1
Single-speed Motor & Hardware, SHPF
5.0
R0490200
1
Single-speed Motor & Hardware, SHPM
.75
R0479301
1
Single-speed Motor & Hardware, SHPM
1.0
R0479302
1
Single-speed Motor & Hardware, SHPM
1.5
R0479303
1
Single-speed Motor & Hardware, SHPM
2.0
R0479304
1
Single-speed Motor & Hardware, SHPM
2.5
R0479305
1
Two-speed Motor & Hardware, SHPM
1.5
R0479307
1
Two-speed Motor & Hardware, SHPM
2.0
R0479308
1
Two-speed Motor & Hardware, SHPM
2.5
R0479309
1
Single-speed Motor & Hardware, SHPF, 3 Phase
1.0
R0479101
1
Single-speed Motor & Hardware, SHPF, 3 Phase
1.5
R0479102
1
Single-speed Motor & Hardware, SHPF, 3 Phase
2.0
R0479103
1
Single-speed Motor & Hardware, SHPF, 3 Phase
3.0
R0479104
1
Two-speed Motor & Hardware, SHPF
1.0
R0445113
1
Two-speed Motor & Hardware, SHPF
1.5
R0445106
1
Two-speed Motor & Hardware, SHPF
2.0
R0445107
2
Backplate Kit w/Hardware, O-ring & Mech Seals, SHPF/SHPM
.50-3.0
R0445200
2
Backplate Kit w/Hardware, O-ring & Mech Seals, SHPF
5.0
R0445201
3
Impeller Replacement Kit, SHPF
.50
R0807204
3
Impeller Replacement Kit, SHPF
.75
R0807203
3
Impeller Replacement Kit, SHPF
1.0, 1.0-2
R0807202
3
Impeller Replacement Kit, SHPF
1.5, 1.5-2
R0807201
3
Impeller Replacement Kit, SHPF
2.0, 2.0-2
R0807200
3
Impeller Replacement Kit, SHPF
3.0
R0807205
3
Impeller Replacement Kit, SHPF
5.0
R0807207
Symptom
Possible Problem/Solution
There is no debris blocking
the impeller
and
the pressure
is still low.
The pump impeller and diffuser are showing signs of normal wear. Have a qualified
service technician check the impeller and diffuser and replace as necessary.
If the pump is part of a relatively new installation, it could be an electrical problem.
Contact a qualified service technician. Have the technician check for loose electrical
connections and check the voltage at the pump motor while it is in operation. The
voltage must be within 10% of the motor's data plate rating. If the voltage is not
within 10%, contact a qualified electrician and/or the local power service provider.
The pump is leaking water
between the motor and pump
body.
This is caused by a damaged or failed mechanical seal. Pump seal is leaking air.
Have a qualified service technician replace the seal.
The pump gets hot and shuts
off periodically.
Ensure that there is adequate room around the motor to circulate air and keep the
motor cool. Have a qualified electrician check for loose connections and check the
voltage at the pump motor while it is in operation. The voltage must be within 10%
of the motor's data plate rating. If the voltage is not within 10%, contact a qualified
electrician and/or the local power service provider.
Page 15
ENGLISH
Jandy
®
Pro Series Stealth
™
Pumps
|
Operation Manual