Page 4
ENGLISH
Jandy
®
Commercial Horizontal Sand Filter | Installation & Operation Manual
WARNING
HAZARDOUS PRESSURE.
Pool and spa water circulation systems operate under hazardous pressure during startup, normal operation, and after
pump shut-off. Stand clear of circulation system equipment during pump start-up. Failure to follow safety and operation instructions could cause
property damage, severe personal injury, or death. Before servicing pool and spa water circulation system, all system and pump controls must be in
off position and filter manual air relief valve must be in open position. Before starting system pump, all system valves must be set in a position to allow
system water to return back to the pool. Do not change filter control valve position while system pump is running. Before starting system pump, fully
open filter manual air relief valve. Do not close filter manual air relief valve until a steady stream of water (not air or air and water mix) is discharged
from the valve. All suction and discharge valves MUST be OPEN when starting the circulation system. Failure to do so may result in death, serious
personal injury or property damage.
WARNING
SEPARATION HAZARD.
Failure to follow safety and operation instructions could result in violent separation of pump components. Strainer cover
must be properly secured to pump housing. Before servicing pool and spa circulation system, all system and pump controls must be in off position
and filter manual air relief must be in open position. Do not operate pool and spa circulation system if a system component is not assembled properly,
damaged, or missing. Do not operate pool and spa circulation system unless access hatch is in seated position in filter body. All suction and discharge
valves MUST be OPEN when starting the circulation system. Failure to do so may result in death, serious personal injury or property damage.
SAVE THESE INSTRUCTIONS