background image

Page 4

Section 1. Safety Information

IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF FIRE,

 ELECTRIC SHOCK, OR INJURY TO PERSONS 

READ AND FOLLOW ALL INSTRUCTIONS

When installing and using this electrical equipment, basic safety precautions should always be followed, 
including the following:

        

 

 

 

SAVE THESE INSTRUCTIONS

  WARNING

RISK OF ELECTRICAL SHOCK OR ELECTROCUTION. 

This underwater light must be installed by 

a licensed or certified electrician in accordance with the National Electrical Code and applicable local 
codes and ordinances.  Improper installation will create an electrical hazard, which could result in 
death or serious injury to pool or spa users, installers, or others due to electrical shock, and may also 
cause damage to property.  Read and follow the specific instructions below.

  WARNING

Before installing this underwater light, read and follow all warning notices and instructions 
accompanying this light. Failure to follow safety warnings and instructions can result in severe injury, 
death, or property damage. Call (707) 776-8200 for additional free copies of these instructions.

 ATTENTION INSTALLER: 

 This manual contains important information about the 

installation, operation and safe use of this product. This information should be given to the 
owner/operator of this equipment.

  NOTICE

These lights are intended for installation in fresh water swimming pools and spas only.

Содержание JandyColors JPL120100





















Отзывы: