Page 8
ENGLISH
Jandy
®
Pro Series, White LED Lights
|
Installation Manual
5.1 Wiring to an AquaLink
®
RS Control
System
The Jandy Pro Series White LED Lights can be wired
into the Jandy Pro Series AquaLink
®
RS control system
to provide simplified operation of the lights. Connect the
lights to one of the auxiliary relays in the Power Center.
NOTE
It is recommended to connect one light per relay so
each light can be controlled separately. However, up to
four lights can be connected on a single relay. If there
are more than four lights installed on one AquaLink RS
system, ensure there is more than one auxiliary relay
available in the Power Center.
Refer to Figures 2 and 3 to connect the Jandy Pro Series
White Lights to the Power Center.
WARNING
RISK OF ELECTRICAL SHOCK OR
ELECTROCUTION,
which could result in serious
injury or death.
A Ground Fault Circuit Interrupter
(GFCI) must be provided for 120 volt models. A
Ground Fault Circuit Interrupter (GFCI) for 120
Volt transformers should be used if required by the
transformer manufacturer or if required by the local
applicable code and/or Authority Having Jurisdiction
(AHJ). When a GFCI is used, the conductors on the
load side of the GFCI circuit shall not occupy conduit,
boxes, or enclosures containing other conductors
unless the additional conductors are also protected by
a GFCI. Refer to local codes for complete details.
NOTE
The Jandy Pro Series White Lights are available in
120-volt and 12-volt versions. If installing a 12-volt
light, a NRTL certified 120-volt/12-volt step-down (AC)
transformer
must
be used. For more information about
12-volt installations, refer to
Section 8
of this manual.
5.2 Wiring to a Time Clock
The Jandy Pro Series White LED Lights can be wired
into a basic time clock to automatically turn on the lights
at a predesignated time. Refer to Figure 4 to connect the
lights into the time clock.
5.3 Wiring to a Switch
The Jandy Pro Series White LED Lights can be wired
into a switch to manually turn on/off the lights. Refer to
Figure 5 to connect the lights into the switch.
GFCI
Black
White
Green
Ground
Ground
Neutral
120 VAC
Power Supply
Black
White
Green
JUNCTION
BOX
120V
LED
Light
Figure 2. 120-Volt Jandy Pro Series White LED
Light Wiring Diagram
Black
White
Green
Ground
Neutral
120 VAC
Power Supply
Black
White
Green
JUNCTION
BOX
12V
LED
Light
120V/12V
Transformer
Black
White
Green
Figure 3. 12-Volt Jandy Pro Series White LED Light
Wiring Diagram