background image

- 10 -

 nVIDIA N61P/N61S/N61V                                                                                User Manual

Ejector Tab

 

Notch Key

 

Mounting Notch

 

Rib

    

2.3.2 Installation of the CPU Cooler

        For proper installation, please kindly refer to the instruction manuals of your CPU Cooler.

2.4 Installation of Memory Modules

    This mainboard provides four 240-pin DDRII (Double Data Rate) DIMM slots, and supports 

    Dual Channel Memory Technology. For dual channel configuration, you always need to install 

    two identical (the same brand, speed, size and chip-type) memory modules in the DDRII 

    DIMM slots to activate Dual Channel Memory Technology. Otherwise, it will operate at single 

    channel mode.

    To reach the performance of Dual Channel DDR2, the following rules must be obeyed:

    For 2-DIMM dual-channel installation:

    Populate DIMM modules of the same type and size on slots [DDR1]+[DDR2], or slots

    [DDR3]+[DDR4] (for nVIDIA N61(V2.0) Only).

    For 4-DIMM dual-channel installation: (for nVIDIA N61(V2.0) Only)

    Populate 2 DIMM modules of the same type and size on slots [DDR1]+[DDR2], and    

    another 2 DIMM modules of the same type and size on slots [DDR3]+[DDR4] .

    [DDR1] and [DDR2] slots are made of the same color.

    [DDR3] and [DDR4] are made of another same color.

    To install system memory:

    1. Power off the computer and unplug the 

        AC power cord before installing or 

        removing memory modules.

    2. Locate the DIMM slot on the board.

    3. Hold two edges of the DIMM module 

        carefully, keep away from touching its 

        connectors.

    4. Align the notch key on the module with 

        the rib on the slot.

    5. Firmly press the module into the slots until the ejector tabs at both sides of the slot     

        automatically snap into the mounting notch. Do not force the DIMM module in with extra

        force as the DIMM module only fits in one direction.

    6. To remove the DIMM modules, push the two ejector tabs on the slot outward     

        simultaneously, and then pull out the DIMM module.

Static electricity can damage the electronic components of the computer or optional     

boards. Before starting these procedures, ensure that you are discharged of static 

electricity by touching a grounded metal object briefly.

Содержание nVIDIA N61P






































Отзывы: