- 2 -
JW-N7AS-HD User's Manual
•
Clear NVRAM
This item for clearing NVRAM during system boot.
•
Plug & Play O/S
This item lets the BIOS configure all the devices in the system or lets the operating system
configure plug and play (PnP) devices not required for boot if your system has a Plug and Play
operating system.
•
PCI Latency Timer
This item sets value in units of PCI clocks for PCI device latency timer register.
•
IRQ3/4/5/7/9/10/11/14/15
Allows to you assigns IRQ 3,4,5,7,9,10,11,12,14,15 to the first PCI slot.
•
DMA Channel 0/1/3/5/6/7
Available: Specified DMA is available to be used by PCI/PnP devices.
Reserved: Specified DMA is reserved for use by Legacy ISA devices.
•
Reserved Memory Size
Allows you to select size of memory block to reserve for legacy ISA devices.
4.5.5 Boot setting
►
Boot Settings Configuration
Click <Enter> key to enter its submenu, it will be display boot setting configuration,and the
all functions allow BIOS to skip certain tests while booting, whether displays normal POST
messages or OEM Logo instead of POST messages through sets the Quit Boot.
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Power
JUSTw00t!
Exit
Boot Settings
Configure Settings
during System Boot.
←
Select Screen
↑
↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
►
Boot Settings Configuration
►
Boot Device Priority
►
Hard Disk Drives
►
Removable Drives
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
←
Select Screen
↑
↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'Del' Message Display
Interrupt 19 Capture
[Enabled]
[Disabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
