- 20 -
JW-N7AS-HD User's Manual
•
Type
Use this item to configure the type of the IDE device that you specify.
•
LBA/Large Mode
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device
supports this mode, and if the device was not previously formatted with LBA mode disabled.
•
Block (Multi-Sector Transfer)
Enables or disables data multi-sectors transfers.
•
PIO Mode
Allows you to select the data transfer mode.
•
DMA Mode
Selects the DMA mode.
•
S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting Technology.
•
32Bit Data Transfer
Enables or disables 32-bit data transfer.
►
AHCI Device
BIOS SETUP UTILITY
Main
USB Configuration
Enables support for
legacy USB. AUTO
option disables
legacy support if
no USB devices are
connected.
←
Select Screen
↑
↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Module Version -2.24.3-13.4
USB Devices Enabled :
None
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
[Enabled]
[FullSpeed]
[Enabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
•
Legacy USB Support
Enabled or Disabled Legacy USB option, and Auto option disables legacy support if no USB
devices are connected.
•
USB 2.0 Controller Mode
Allow you to selects the HiSpeed(480Mbps) or FullSpeed(12Mbps).
•
BIOS EHCI Hand-Off
Allows you to enable the support for operating systems without an EHCI hand-off feature.
BIOS SETUP UTILITY
Main
AHCI Device
Some SATA CD/DVD in
AHCI mode need to wait
ready longer.
←
Select Screen
↑
↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
AHCI CD/DVD Boot Time out [35]
►
AHCI Port0 [Not Detected]
►
AHCI Port1 [Not Detected]
►
AHCI Port2 [Not Detected]
►
AHCI Port3 [Not Detected]
►
AHCI Port4 [Not Detected]
►
AHCI Port5 [Not Detected]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
►
USB Device
