JANDS DD-8 DMX SPLITTER
Revision 2.0 - 5 July 1998
OPERATING MANUAL
- 2 -
EMC COMPLIANCE
This product is approved for use in Europe and Australia/New Zealand and conforms to the following standards:
European Norms
Australian / New Zealand
Standards
EN 50081-1
AS/NZS 4252.1
EN 50082-1
AS/NZS 4251.1
EN 60335-1
AS/NZS 3350.1
To ensure continued compliance with EMC Directive 89/336 and the Australian Radiocommunications Act 1992, use
only high quality data cables with continuous shield, and connectors with conductive backshells. Examples of such
cables are:
DMX:
Belden 8102 100% Aluminium foil screen, 65% Copper braid.
JANDS ELECTRONICS PTY LTD 1997
All rights reserved
DISCLAIMER
Information contained in this manual is subject to change without notice and does not represent a
commitment on the part of the vendor. JANDS ELECTRONICS P/L shall not be liable for any loss or
damage whatsoever arising from the use of information or any error contained in this manual.
It is recommended that all service and repairs on this product be carried out by JANDS
ELECTRONICS P/L or it’s authorised service agents.
JANDS lighting products must only be used for the purpose they were intended by the manufacturer
and in conjunction with the user manual.
JANDS ELECTRONICS P/L cannot accept any liability whatsoever for any loss or damage caused by
service, maintenance or repair by unauthorised personnel, or by use other than that intended by the
manufacturer.
Manufactured in Australia by:
JANDS ELECTRONICS PTY LTD
ACN 001 187 837
(40 KENT RD)
LOCKED BAG 15
MASCOT
NSW
1460
AUSTRALIA
PHONE:
+61-2-9582-0909
FAX:
+61-2-9582-0999
EMAIL:
Internet: [email protected]
Содержание DD-8
Страница 1: ...JANDS DD 8 O p t o I s o l a t e d D M X S p l i t t e r Operating Manual Version 2 0...
Страница 11: ......
