Jands DD-8, Руководство по эксплуатации

Страница: 13 / 16

JANDS DD-8 DMX SPLITTER
Revision 2.0 - 5 July 1998 OPERATING MANUAL - 13 -
6.0 Installation
The DD-8 is designed for mounting in standard 19 inch equipment racks. Adequate
ventilation should be provided around the top of the chassis, however no blank spaces
are required above or below the DD-8 specifically for ventilation of this device. Note
that such spaces may be necessary to prevent the ambient temperature from rising above
the maximum if other heat producing devices are mounted in the same rack.
No rear mounting is necessary due to the low weight of the unit.
7.0 Maintenance
WARNING
DO NOT ALLOW THE ENTRY OF LIQUIDS OF ANY SORT INTO THE DD-8.
With care, the DD-8 will require little maintenance. If the lexan panels require cleaning,
wipe with a mild detergent on a damp soft cloth.
DO NOT spray liquids onto the panels.
DO NOT use solvents for cleaning the panels.