17
Leaner Setup
Unfolding the sideboards
•
With two people inside the grain cart, loosen the bolts in hole B and remove the bolts from hole D of each inside brace and fold out
the side board.
•
Insert a 3/8”-16 x 1” Gr5 Z SF Hex Bolt and 3/8”-16 Gr5 Z SF Hex Nut into hole C of each inside brace.
NOTE: Do not tighten the bolts
Install Center Cross Brace
•
Using (2) 3/8”-16 x 1” Gr5 Z SF Hex Bolts and 3/8”-16 Gr5 Z SF Hex Nuts attach the 3 center cross braces to hole A on the Opposite
Auger Side and High Sideboard Brace on the Auger Side.
•
Insert 3/8”-16 x 1” Gr5 Z SF Hex Bolts and 3/8”-16 Gr5 Z SF Hex Nuts into the sideboard and the corners.
•
Make sure that the side of the grain cart is straight.
•
Adjust the sideboards as necessary and tighten all the braces.
•
After all braces are tightened, tighten all bolts of the front and back corners.
A
D
C
B
Figure 4
Содержание X1522 Series
Страница 2: ...2 Stance Rear Front Passenger Side Driver Side...
Страница 30: ...30 Spout Assembly 16 17 18 13 15 14 19 21 20 22 6 5 2 1 4 10 11 3 9 12 7 8 23...
Страница 45: ...45...
