J&M TF2, Руководство оператора

Страница: 11 / 33

11
General Information Set-Up Instructions
• Base Unit Baskets
Attach the 3’ Heavy Torsion arms to the rolling basket. Secure with 1” x 6-1/2” hex
bolt and 1” nylon locking hex nut. Fasten hardware once secured.
(Rocker Pads may need installed. Use 4-1/8” x 4-1/2” x 5/8” U-Bolt and (2) 5/8”
nylon locking hex nuts.)
Make sure the baskets are symmetrically placed on the Base Unit Main
Frame and have a 1-1/2” clearance between baskets.
NOTE: Be sure the basket assemblies with the 3” x 3” torsion arms are secured to the
Base Unit Main Frame. The rolling basket assemblies for the side wings have a smaller
2-1/2” x 2-1/2” torsion arm.
•
Attach the torsion arm - rolling basket assembly to the main frame. Secure each
torsion arm with (2) 5/8” x 4” x 6” U-bolts and a 5/8” centerlock hex nut.
Fasten hardware once secured.
• Jack Stand
Secure the Jack Stand Weldment to the Main Frame using (5) 1/2” x 1-1/2” hex
bolts and (5) 1/2” centerlock hex nuts. Fasten hardware once secured.
Attach the jack stand to the support arm using the supplied pin.
• Wing Frame
Attach the Wing Frames to the Main Frame. For each wing use :
• 1-3/4” x 6-3/8” Welded Pin
• 1-3/4”x 5” Welded Pin
• (2) 1-3/4” Hex Nuts
• 4” Wing Pin
• (4) Roll Pins
Once secured, fasten hardware.
• Wing Rest
Attach a Wing Rest weldment to each wing. Secure using (4) 1/2” x 1-1/4” hex
bolts and (4) 1/2” centerlock hex nuts.
Once secured, fasten hardware.
1-3/4” x 6-3/8” 4” Wing Pin 1-3/4”x 5”
Wing Frame
Wing Rest
Jack Stand Weldment
Jack Stand
1/2” x 1-1/2”
Rolling Basket
Torsion Arms
3” x 3”
5/8” x 4” x 6”
U-Bolts
Wheel & Tire Assembly
Rocker Pad