Front Factory
Speaker Harness
Gray/
Red
Green/
Black
Green/
White
White/
Orange
Right
Left
FL
White
FR
Red
RL
White
RR
Red
Power Harness
FRONT
Amplifier
Cigarette
Lighter
Green
Green/
Brown
Brown
White/
Brown
Right Speaker
Gray/
Red
Green/
Black
Left Speaker
White/
Orange
Green/
White
Right Speaker
Left Speaker
Orange
Orange/White
Acc. wire from
headlight harness
(Optional power harness –
for use with J&M lower
fairing light rings)
Red
Black
REAR
Plug into factory
Harman Kardon radio
-OR-
Remove the four wired pins
from this plug and insert them
into the existing plug in this
position on the back of the
Harley HK radio
Fig. I
Fig. K
Fig. J
10. Using the (2) remaining 6-32 screws, washers, and
lock-nuts, attach the amplifier to the already installed upper
mounting bracket.
(Figure I)
Attach the lower mounting bracket
to the lower right hand fairing mounting stud.
(Figure J)
Position the amplifier upward as much as possible
and tighten all hardware.
11. Make amplifier/speaker connections according to diagram.
(Figure K)
12. Test the system for proper operation before reassembling
the fairing, realizing that full sound quality and fidelity will not
be heard until the outer fairing shell is completely reinstalled.
Note: To activate the front/rear fade feature of your Harley
HK radio, ask your dealer to reflash the audio system for
front/rear fade.
