Fig. E
Fig. F
Fig. G
Fig. H
5. Remove both of the right-side radio mounting bolts.
(Figure
B)
6. Remove the upper inboard speaker screw from the right-
side J&M 7.25” speaker.
(Figure C)
If you are using 5.25”
speakers, remove the top speaker screw from the right-side
speaker.
(Figure D)
7. Choose the correct upper amplifier mounting bracket for
the size speakers you are using.
(Figure E)
8. Install the bracket into the fairing using the (2) longer Allen-
head bolts provided and the previously removed speaker screw.
(Figure F)
If using 5.25” speakers, use of the provided longer
self-tapping speaker screw is required.
(Figure G)
9. Using (2) of the 6-32 screws, washers, and lock-nuts
provided, attach the lower amplifier mounting bracket to the
amplifier.
(Figure H)
Do not tighten hardware at this time.
remove
7.25” speaker
7.25” speaker
5.25” speaker
Fig. D
remove
5.25” speaker
Fig. C
