8
A
B
C
D
TIE ROD
1. Locate the tongue in the straight and horizontal position. Check this by measuring reference lines “A” and “B”. These
measurements are the same when the tongue is straight forward.
2. To adjust the toe-in of the tire on the front axle, measure the distance between the wheels at the centerline of the tires.
Dimension “C” should be 1/8” to 1/4” shorter than dimension “D”. If not, loosen the locknuts on both ends of both front tie
rods. Adjust both front tie rods evenly as needed. Re-tighten the locknuts and recheck the dimensions.
Adjusting the Wheel Toe-In
Service
Repair Parts List and Diagrams
When performing maintenance work, wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing and
head. Follow the Operator’s Manual instructions to ensure safe and proper maintenance and repair.
Your local, authorized dealer can supply genuine replacement parts. Substitute parts may not meet original equipment specifications
and may be dangerous.
WARNING MAKE SURE ALL POWER IS SHUT OFF BEFORE PERFORMING ANY MAINTENANCE OR REPAIR WORK.
