background image

6

Decals

DO NOT ENTER GRAIN TANK WHEN

AUGER IS RUNNING.

KEEP OFF THE LADDER WHILE

THE MACHINE IS OPERATING,

IN TRANSPORT OR THE

UNLOADING AUGER IS IN MOTION

2

3

4

5

6

7

8

9

11

12

13

16

Lock-n-Load

Active

12 Volt

Active

Close Gate To Fold Auger

10

FOR FARM USE ONLY

WARNING

HIGH PRESSURE FLUID HAZARD

To prevent serious injury or death:

Relieve pressure on system before repairing

or adjusting or disconnecting

Wear proper hand and eye protection when

searching for leaks.  Use wood or cardboard

instead of hands.

Keep all components in good repair.

WARNING

DO NOT ADJUST, SERVICE, CLEAN OR LUBRICATE

THE MACHINE UNTIL ALL POWER IS SHUT OFF.

KEEP ALL SAFETY SHIELDS IN PLACE.

KEEP PEOPLE AND OBJECTS CLEAR OF EQUIPMENT

BEFORE APPLYING POWER OR MOVING THE MACHINE.

PREVENT PEOPLE FROM RIDING ON THE MACHINE.

FALLING CAN CAUSE SERIOUS INJURY OR DEATH.

BEFORE HIGHWAY TRAVEL, SECURE A SLOW-MOVING

VEHICLE EMBLEM TO THE REAR OF THE MACHINE.  

MAKE SURE ALL FLASHER, TURN INDICATOR AND

BRAKE LIGHTS ARE WORKING PROPERLY BEFORE

HIGHWAY TRAVEL.

CHECK ALL WHEEL NUTS

DEALER OR MANUFACTURER IS NOT

RESPONSIBLE FOR DAMAGE CAUSED BY

LOOSE WHEEL NUTS.

CHECK TIRE INFLATION

DO NOT INFLATE TIRES MORE THAN 6 PSI

OVER THE RECOMMENDED PRESSURE

PRINTED ON THE SIDE OF THE TIRE.

DO NOT ENTER GRAIN TANK WHEN

AUGER IS RUNNING.

KEEP OFF THE LADDER WHILE

THE MACHINE IS OPERATING,

IN TRANSPORT OR THE

UNLOADING AUGER IS IN MOTION

KEEP HANDS AND CLOTHING AWAY

FROM MOVING PARTS

KEEP HANDS AND CL

OTHING A

WAY

FROM MO

VING PARTS

FLOWING GRAIN TRAPS

AND SUFFOCATES

VICTIMS IN SECONDS!

NEVER PLAY IN OR ON GRAIN CART

YOU CAN DIE IN SECONDS

IN FLOWING GRAIN!

HELP!

Lock-n-Load

Active

12 Volt

Active

Close Gate To Fold Auger

FOR FARM USE ONLY

CHECK ALL WHEEL NUTS

DEALER OR MANUFACTURER IS NOT

RESPONSIBLE FOR DAMAGE CAUSED BY

LOOSE WHEEL NUTS.

CHECK TIRE INFLATION

DO NOT INFLATE TIRES MORE THAN 6 PSI

OVER THE RECOMMENDED PRESSURE

PRINTED ON THE SIDE OF THE TIRE.

1

14

15

17

8

18

WARNING

HIGH PRESSURE FLUID HAZARD

To prevent serious injury or death:

Relieve pressure on system before repairing

or adjusting or disconnecting

Wear proper hand and eye protection when

searching for leaks.  Use wood or cardboard

instead of hands.

Keep all components in good repair.

WARNING

DO NOT ADJUST, SERVICE, CLEAN OR LUBRICATE

THE MACHINE UNTIL ALL POWER IS SHUT OFF.

KEEP ALL SAFETY SHIELDS IN PLACE.

KEEP PEOPLE AND OBJECTS CLEAR OF EQUIPMENT

BEFORE APPLYING POWER OR MOVING THE MACHINE.

PREVENT PEOPLE FROM RIDING ON THE MACHINE.

FALLING CAN CAUSE SERIOUS INJURY OR DEATH.

BEFORE HIGHWAY TRAVEL, SECURE A SLOW-MOVING

VEHICLE EMBLEM TO THE REAR OF THE MACHINE.  

MAKE SURE ALL FLASHER, TURN INDICATOR AND

BRAKE LIGHTS ARE WORKING PROPERLY BEFORE

HIGHWAY TRAVEL.

FLOWING GRAIN TRAPS

AND SUFFOCATES

VICTIMS IN SECONDS!

NEVER PLAY IN OR ON GRAIN CART

YOU CAN DIE IN SECONDS

IN FLOWING GRAIN!

HELP!

 ATTENTION!  BECOME ALERT!  YOUR SAFETY IS INVOLVED!   

Replace Immediately If Damaged or Missing

Description

Part No.

1

J&M Oval Decal (Medium) 5-1/2” x 8-1/2”

JM0010179

2

www.jm-inc.com Decal

JM0019239

3

Danger, Do Not Enter Grain Tank Decal

JM0018033

4

Danger, Keep Off Ladder Decal

JM0018034

5

Warning, Keep Hands Away Decal

JM0018039

6

Closed Decal

JM0025434

7

Open Decal

JM0025433

8

Danger, Electric Lines Decal

JM0015099

9

J&M Oval Decal (Large) 9-1/2” x 15”

JM0015151

10 Danger, Keep Hands and Clothing Away Decal

JM0018035

11 Check Tire Inflation Decal

JM0018041

12 Check All Wheel Nuts Decal

JM0018043

13 Lock and Load Indicator Lights Decal

JM0044289

14 Important Operating Instructions Yellow Grain Cart Decal JM0021245
15 Warning, Do Not Adjust Or Service Decal

JM0014979

16 Warning, High Pressure Fluid Hazard Decal 4” x 4”

JM0010163

17 For Farm Use Only Decal

JM0018038

18 Danger, Flowing Grain Traps Grain Cart Decal

JM0018037

Содержание 750







































Отзывы: