21
Aligning the Tarp/Troubleshooting
1 . When the tarp is in closed position roll the tarp up to the tightening lip so the tarp is taught .
2 . Open the tarp .
3 . If the tarp is rolling at an angle (Figure 1), close the tarp until it’s in the same position as Figure 3 .
4 . Now insert a 5” section of 1/8” self-adhesive rubber into the rear end of the roll tube . Figure 4
5 . Repeat steps 1-4 until the tarp rolls correctly .
NOTE: If the tarp is not rolling in the right direction when the open/close buttons are pushed, switch the black and
yellow wires that are connected to M1 and M2 of the motor.
Figure 1
Figure 2
Figure 3
Figure 4
Correct
Incorrect
1/8” Self Adhesive Rubber
Содержание 1000
Страница 16: ...16 Installing Electric Roll Tarp ...
Страница 22: ...22 Repair Parts ...
Страница 29: ...29 ...
