WARRANTY REGISTRATION FORM
Please fill out this card completely and mail it immediately after purchase. Please be sure that your zip code
and serial number (if applicable) are legible. This will help us to serve you better.
NOTE: Lift the velcro flap on the right speaker pouch to expose serial number
.
(PLEASE PRINT)
Name_______________________________________________________________________________________________________________________________________________________
Address_____________________________________________________________________________________________________________________________________________________
City _______________________________ _________________________________State __________________________ Zip ____________________________________________________
Motorcycle
❍
Other
❍
E-mail ________________________________________________________________________________________________
Make ___________________________________________ Model ______________________________________
Year __________________
Product part number ______________________________________________________________________
Serial number (if applicable)________________________________________________________________
Date of purchase _________________________________________________
Name of dealer it was purchased from ____________________________________________________________________________________
Mail to:
J&M Corporation
1415 S. Cherry Avenue
Tucson, AZ 85713
U.S.A.
✃
Thank you
for the confidence you have shown in J & M by purchasing one of
our innovative products. It will give you many hours of riding pleasure. If you
have any questions during installation or require more information about this
product, you may call our Customer service Department (English only,
please) at 1-800-358-0881, Monday through Friday, 8:00 a.m. to 5:00 p.m.
Mountain Standard Time, U.S.A.
J&M Corporation
Tucson, Arizona, U.S.A.
Tel. 1-800-358-0881
www.jmcorp.com
[email protected]
8. Once paired the smart phone will not need to be re-paired to the JMDM-IPBT-GL18 each time the ignition switch is turned on.
Note:
The intercom mute sensitivity level on the Gl-1800 audio system should be set to level 5 during cell phone conversation to pre-
vent the muting of the incoming cell phone audio level.
Pairing and Operation of the JMDM-IPBT-GL18 to a Bluetooth Enabled Garmin Zumo 660/665
1. Turn the motorcycle ignition switch to on or accessory position.
2. Select the hands-free menu on the Zumo command center, go into the Bluetooth section and have it search for devices. When
JM-MPBT-2 is displayed on the screen, click on it. When you are asked for a passkey, enter: 9088. Your Zumo unit should now pair with
the JMDM-IPBT-GL18.
3. Now pair your cell phone to the Zumo, as per the linking/operation instructions included with it.
4. If your Zumo has a built in media player, you can play music through the Gl-1800 audio system. Select the media player and click on
the play button. Adjust the music volume to a maximum level before distortion. The Tune/Disc button the handlebar can be used to
track the music up and down on the Zumo 660/665.
5. To set the Zumo navigation and/or cell phone conversation volume levels, refer to the operation instructions included with your Zumo
660/665. Additional cell phone volume adjustments can also be made on the cell phone itself, but during actual conversation only.
6. Once paired the Zumo will not need to be re-paired to the JMDM-IPBT-GL18 each time the ignition switch is turned on.
Note:
The intercom mute sensitivity level on the Gl-1800 audio system should be set to level 5 during cell phone conversation to
prevent the muting of the incoming cell phone audio level.
