1. Product Description
This exciting new digital music player from J&M will plug direct-
ly into the CD selected music input plug on all 2001-2010
Honda Gold Wing audio systems, replacing the Honda CD
changer, at a fraction of the cost.
Store and play up to 884 MP3 song tracks from your music
library on a single SD card, (exact # of song track storage and
playback will vary depending on model year of the GL-1800)
and toggle thru song after song using your existing handlebar
audio system controls.
Plug in your iPod®with your favorite music files stored, and tog-
gle thru song after song using your existing handlebar audio
system controls, without discharging your iPod’s internal bat-
tery.
Plug in your remote mounted Satellite radio receiver or MP3
player, using the 3.5mm 3-conductor plug accessory cable and
enjoy high-quality stereo music thru the Honda audio system
CD selection.
Link by Bluetooth®your cell phone or Garmin®Zumo to the
player and your cell phone conversations or navigation com-
mands will automatically prioritize OVER whichever music files
are being played at the time, allowing hands free cell phone
conversations, by both the driver and passenger thru their J&M
brand helmet headsets.
If your cell phone/smart phone/Garmin Zumo 660/665 also
contains stored stereo music files, they will stream via
Bluetooth, into the music player and on thru to the GL-1800
audio system.
Control head mounts down into the base inside the tail trunk,
in place of the CD changer, along with the custom J&M micro-
phone signal adapter harness, as a complete plug-n-play instal-
lation.
This digital music player/cell phone kit includes a direct plug-n-
play harness for the GL-1800 audio system, SD card
reader/adapter, USB cable extension for iPod, 3.5mm aux
extension cable for satellite radio or MP3 player, pre-loaded
4Gb test SD card, pre-gummed Velcro mounting strips and
complete installation and operation instructions.
Note:
When installing this unit on 2009-2010 GL-1800s, if you
wish to use the XM satellite radio feature of your audio sys-
tem, with this digital music changer, you will need to purchase
at additional cost J&M part# JMDM-ADT-GL18.
Supported Bluetooth Profiles
A2DP (Advanced Audio Distribution Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
AVRCP ( Audio Video Remote Control Profile)
2. Safety and General Information
IMPORTANT INFORMATION FOR SAFE AND EFFICIENT OPER-
ATION. READ THIS INFORMATION BEFORE USING YOUR
DEVICE.
Users are not permitted to make changes or modify the device
in any way. Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation. See FCC 47 CFR Sec. 15.19
(3).
ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY
Note: Nearly every electronic device is susceptible to electro-
magnetic interference (EMI) if inadequately shielded, designed
or otherwise configured for electromagnetic compatibility.
FACILITIES:
To avoid electromagnetic interference and/or com-
patibility conflicts, turn off your device in any facility where
posted notices instruct you to do so. Hospitals or health care
facilities may be using equipment that is sensitive to external
RF energy.
AIRCRAFT:
When instructed to do so, turn off your device
when on board an aircraft. Any use of a device must be in
accordance with applicable regulations per airline crew instruc-
tions.
MEDICAL DEVICES
HEARING AIDS
: Some devices may interfere with some hear-
ing aids. In the event of such interference, you may want to
consult with your hearing aid manufacturer to discuss alterna-
tives.
OTHER MEDICAL DEVICES
If you use any other personal medical device, consult the man-
ufacturer of the device to determine if it is adequately shielded
from RF energy. Your physician may be able to assist you in
obtaining this information.
Industry Canada Notice to Users:
Operation is subject to the
following two conditions: (1) This device may not cause inter-
ference and (2) This device must accept any interference,
including interference that may cause undesired operation of
the device.
FCC Notice to Users:
This equipment has been tested and
found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following mea-
sures:
Product Description
Section 1
Safety & General Information
Section 2
Package Contents
Section 3
Installation Instructions
Section 4
General Operation Instructions
Section 5
Bluetooth Linking/Pairing Scenarios
Section 6
Table of Contents
