Pairing the HS-BLU277 to Bluetooth Enabled Devices
(Cell Phone, Bluetooth Enabled MP3 Players, GPS Audio Command Centers, or
other Bluetooth Enabled Devices.
1. Turn on the HS-BLU277 with the on/off Intercom Volume Control (D). NOTE: If
you wish to use your HS-BLU277 unit as a driver/passenger intercom amplifier
only, it is not necessary to also turn on the Bluetooth Linking portion of this
unit.
2. To activate Bluetooth Linking Features
Press and Hold
the Multifunction Button
(A) for about 13 seconds, then release the Multifunction Button. The Blue
Linked /Pairing LED should now be flashing rapidly. The HS-BLU277 is now in
Pairing Mode.
3. A. If using a Bluetooth enabled cell phone, select the Hands Free menu on the
cell phone and have it search for Devices. When JM_CORP_HHS_01 is displayed
on your phone and you are asked for a passkey, Please enter: 0000. Your cell
phone is now paired with the HS-BLU277.
NOTE: If the Bluetooth portion of the headset is already on. It is necessary to
turn the Bluetooth function off by pressing and holding the multifunction
switch until the blue LED turns off and then pressing and holding the multi-
function for about 13 seconds to put it into pairing mode.
B. If using a Bluetooth Dongle. Power on the Dongle and put the Dongle in a pair-
ing mode. Turn on the HS-BLU277 and
Press and Hold
the Multifunction Button
(A) for about 13 seconds to put the HS-BLU277 in a pairing mode. Both the
Dongle and the HS-BLU277 LED's will be flashing rapidly until the two unit's pair
and the LED's flash at a slower rate.
C. If using a Bluetooth enabled GPS, select the tools menu and then select
Bluetooth, Turn on the HS-BLU277 and
Press and Hold
the Multifunction Button
(A) for about 13 seconds to put the HS-BLU277 in pairing mode, then select
connect Headset on the GPS unit. Once the HS-BLU277 is paired the display
will show JM_CORP_HHS_01.
Supported Bluetooth Profiles:
A2DP - Advanced Audio Distribution Profile.
HFP - Hands-Free Profile.
HSP - Headset Profile.
AVRCP - Audio Video Remote Control Profile.
NOTE: For Bluetooth Devices to work together with the HS-BLU277 it is impor-
tant that each device shares the same Bluetooth software profiles as the J&M
HS-BLU277.
Operation of the HS-BLU277 with a Cell Phone.
In order for the operations listed to be accomplished the HS-BLU277 must be
paired to the cell phone.
1. When receiving an incoming call the "incoming call indicator sound" will be
heard in the speakers. If the phone is set to Auto Answer the call will automati-
cally be connected to the HS-BLU277, if the phone is not set to Auto Answer the
multifunction button (A) can be depressed briefly to connect the call.
2. Use the volume Up (B) or Down (C) buttons to adjust the phone volume during
the cell phone conversation. Additional cell volume adjustments can also be
made on the cell phone itself during conversation.
3. To hang up the phone call from the HS-BLU277, depress the multifunction
button (A) briefly or wait until the party that you were speaking with to hang up.
Operation of the HS-BLU277 with a Bluetooth Enabled MP3 or
Dongle.
In order for the operation listed to be accomplished the HS-BLU277 must be paired
to the MP3 player or Dongle.
1. To set the music volume, adjust the volume of the HS-BLU277 to max volume
using the volume up (B) button. Now adjust the MP3 or music source volume
that is feeding the Dongle to a volume level in the Headset that is just before
distortion. Now adjust the volume of the HS-BLU277 to a comfortable listening
level.
Operation of the HS-BLU277 with a Bluetooth Enabled MP3
and cell phone.
1. While listening to music through the MP3 player or Dongle and the cell phone
receives an incoming call, the music will be interrupted and the "incoming call
indicator sound" will be heard in the speakers. If the phone is set to Auto
Answer the call will automatically be connected to the HS-BLU277, if the phone
is not set to Auto Answer the multifunction (A) button can be depressed briefly
to answer the call.
2. Use the volume Up or Down buttons on the cell phone itself to adjust the phone
volume during cell phone conversation.
NOTE: If the HS-BLU277 volume is adjusted during cell phone conversation. The
volume adjustments will have an effect on the music volume when the call ends
and the music resumes.
3. To hang up the phone call from the HS-BLU277, depress the multifunction (A)
button briefly or wait until the party that you were talking with to hang up.
4. The music will resume when the call has ended.
Operation of the Intercom
1. Using the appropriate lower section hookup cord HC-ZBT or PBT connect a stan-
dard J&M Dualmode Headset to jack (E) on the HS-BLU277.
2. Rotate the intercom volume control knob (D) to a volume level position for com-
fortable conversation, but not any higher. Unnecessarily high intercom volume
levels will only increase the unwanted wind and back ground noise you may
experience.
NOTE: It is not necessary for the Bluetooth part of the HS-BLU277 to be turned
on for the intercom portion of this system to function.
POWER
LINKED/
PAIRING
PO
WER ON/OFF
MUL
TIFUNCTION
INT VOL
A
B
C
D
E
NOTE: Before using the HS-BLU277, its
internal lithium/polymer power cell
should be charged for at least 6 hours.
Thank you for the confidence you have shown by purchasing one
of J&M’s innovative products. If you have any questions during the
installation, or require further assistance, you may call us at
1-800-358-0881 from 8:00 a.m. to 5:00 p.m. Mountain Standard
Time, Monday through Friday.
Tucson, Arizona U.S.A.
Tel (800)
358-0881
Website: http://www.jmcorp.com
E-mail: [email protected]
7. Operation Instructions
