JAMO WK 200, Руководство пользователя

Страница: 9 / 72

9
In case a USB-socket doesn’t exist you will have to
connect the transmitter through a suitable cable
(AUX-stereo-cable supplied, optical cable not sup-
plied). Also, you will have to power the transmitter
through a USB power adapter (not supplied).
Connect the receiver to the device that you want to
use for listening (stereo system, powered speak-
ers, powered subwoofer, kitchen device, etc.). The
receiver can be connected to an open USB-port
for power, but will have to be connected through
wires (AUX-stereo-cable supplied, optical cable not
supplied). If the transmitter is connected through
an optical cable you will also have to connect the
receiver through an optical cable.
Make sure that both the transmitter and the receiver
of the WK 200 system are set to the same house-
codes (1, 2 or 3).
If you experience interference or noise at one house-
code-setting you should try to switch to a different
setting. Make sure to change the settings on both
devices.
The Jamo WK 200 is able to transmit both analog
and digital signals. Many modern TV’s have only
digital outputs, and can thus not be used with
analog-only transmitter/receivers.