Jameco Electronics 132214, Руководство пользователя

Страница: 8 / 55

Chapter 1
I
NTRODUCTION
Congratulations on purchasing your ISA I/O (Input/Output)
Card. This User’s Guide is written to provide an easy-to-
read yet thorough reference for installing your ISA I/O Card
Software driver. Before installing device drivers, browse the
Driver CD-ROM Disk to familiarize yourself with its contents.
For Hardware installation, your ISA I/O Card’s Hardware
Guide will provide reference to the instructions in Chapter 2.
NOTE: Before installing your ISA I/O Card, take a few
moments to read the first two chapters of this User’s Guide
and jot down the pertinent information in the Pre-Hardware
Installation Checklist section.
Release Notes
•
The ISA I/O Card driver is located on your Driver CD-
ROM Disk (where “D:” is the designated drive letter:
D:\IO-Card\ISA\ ).
•
While Windows XP does support ISA Serial Ports
(using the Windows 2000 driver), Windows XP DOES
NOT support ISA Parallel Ports .
•
ISA I/O Card serial ports can support autoflow control
and up to a baud rate of 921,600Kbps, except under
Windows NT with COM1-COM4 (3F8h, 2F8h, 3E8h and
2E8h).