Jameco Electronics 132214, Руководство пользователя

Страница: 28 / 55

Chapter 3 - Software Installation
Windows NT 4.0 Driver Installation Guide 21
If you’d like to make changes to your ISA I/O Card’s configu-
ration, follow the steps below. Default values are pre-set by
the computer. Only experienced users should attempt to
make changes to the default settings.
Warning: Tampering with your default values could render
your computer inoperable. Before attempting to adjust your
default settings, make a note of the original default values.
If your changes render your computer inoperable, restore
the original default values.
Click on your Windows Start button. Click Settings and then
click Control Panel.
A Control Panel window will open. Double click the Multi-
I/O Card Configuration icon.
A Multi-I/O Configuration Utility window will appear. From
the PCI/ISA Serial Ports tab, under “Select serial port” use
the drop-down box to select the appropriate COM port that
you’d like to configure. Then click the
Setup button.