Jamara Starlet 006140, Инструкция

Страница: 9 / 20

9
37.
Sanded pants.
40.
The plywood holm is glued to the plank along the edge.
38.
The rudder is sanded on one side if foil is used as hindge and on
both sides if a hindge is used.
41.
The holm is fitted with ribs and the rear holm is inserted.
The shorted holm is not glued yet.
35.
The undercarriage cover is made of 3 layers of balsa. The first
layer is cut out of 1.5 mm balsa with overlap. For filling in width,
3 mm balsa is used.
36.
Pants made of 4 x 6 mm balsa (image without 2 mm side pieces).