7
25.
The balsa pieces are sanded incl. the empennage dummy. If
successful the rear of the fuselage will look as shown once the
dummy has been pulled out.
27.
The empennage and rudder. The wire will be used to joint the
elevator.
26.
The empennage can be fitted to check. You may have to adjust
for the rudders to be in a right angle to the fuselage.
28.
To build a wing mounting support, use the enclosed plywood pi
-
eces.
23.
The transition from fuselage to empennage is now completed.
Glue a place holder made of 4 mm balsa leftovers together and
lay on fuselage.
Do not glue it to the fuselage.
24.
4 mm balsa is glued to the fuselage frontal.
!!Do not let glue drop on the empennage dummy!!
Содержание Starlet 006140
