background image

2

Sicherheitshinweise

Contents 

Safety Information  

2

General Information  

2

Technical data 

2

Highlights  

2

Box contents  

3

Building the Model 

3 - 15

Control Throws and Centre of Gravity 

15

Recommended Accessories 

16

Plans 

17 / 18

Safety Information

Flying models are not toys, and should only be operated by res-
ponsible clear thinking people. Assembling and maintaining mo-
dels requires a basic level of technical skill, and a sensible logical 
approach.

Any error in building, repairing or maintaining the model could 
result in serious injury or damage. Technical problems or an incor-
rectly assembled model may lead to the propeller unexpectedly be-
ginning to turn. Always stay out of the vicinity of rotating propellers
and never allow any item to come into contact with a spinning 
prop. As neither the manufacturer or the dealer has any influence 
over the way that models are operated they can accept no respon-
sibility for and damage caused. 

If this model is the first radio controlled model which you are att-
empting to build or fly, you should secure the assistance of an ex-
perienced model pilot. Your local dealer will be able to assist you 
in locating your local model aircraft club or experienced pilots in 
your area. NEVER fly your model over people and never operate the
model in way which may endanger people or animals. Before your
first flight you should conduct a range check of the radio control 
system, secure the model to a solid object, and ensure that you 
have full control of all functions with the antennae collapsed over a
distance of at least 25 metres. Before and after every flight inspect
the model for damage, and rectify any faults before you attempt to
take off. The operator is responsible for any damage caused by the
operation of flying models. 

Always observe any local laws regarding the operation of model
aircraft. 

Furthermore, the following instructions must be followed: 

-  The kit contains small parts which may cause choking if
  swallowed, keep away from small children.
-  The model should not be changed in any way, doing so will
  invalidate the guarantee.
-  Never come into contact with rotating parts.
-  Do not fly over wet ground or grass as water will damage the
  models electrical components
- Do not expose the model or batteries to direct sunlight, always
  keep them in the shade.
-  Inspect the model before and after every flight for damage.
-  Only ever fly the model if it is in perfect working order.
-  The model can only be flown in good weather. Do not fly in wind,
  rain or thunder storms.
-  Find a place to fly which complies with any laws, and is free from
  obstacles such as trees, houses or power cables.
-  Remember that your model is made from such materials as
  plastic and wood, and as such is inflammable. Keep it away from
  any open flame, or high temperatures.
-  When operating the model, switch on the transmitter first and
  then the aircraft, switch off in the reverse order.
-  Always ensure that the throttle stick is in the low position before
  you switch on. 

General Information 

As the company JAMARA e.K. has no influence over the use, main-
tenance or conditions under which our products will operate, we 
accept no responsibility for any damage caused be it of a physical,
financial or theoretical nature.

JAMARA e.K. will accept no claim against it which results directly or
indirectly from the operation or use of ist products. Your Statutory
Rights apply, any claim made against us will be based solely on the
retail price of the product, and limited to the model only. This will
not apply if we are proved to be legally responsible or when gross
negligence can be proved. 

Attention!
In some countries it is a legal requirement to carry third Party
indemnity insurance when operating a radio controlled mo-
del.  
Please ask your local dealer, governing body or your
insurance company for details.

Attention!
Switch the transmitter on first then the model.
When you are finisished first switch off the model then the
transmitter.

 

Technical data

Wing span 

~ 990 mm

Length 

~ 690 mm

Weight 

~ 600 ~ 650 g 

RC 

4 channel / 4 servos

Motor 

Electric Motor

Highlights:

• Laser cut kit
•  Ideal to have with you at all times
•  Prepared for retracts (only Bonanza)
•  Aileron, elevator, vertical fin and throttle
•  Fuselage made of balsa and plywood
•  Wings made of wood in rib construction

Содержание Spacewalker





















Отзывы: