Jamara Spacewalker, Инструкция

Страница: 10 / 20

10
Zusammenbau
41. Sanded wheel pants. 42. The rudders are sanded either on one side for paper hinges or
both sides for plastic hinges..
43. Supports for the wing spar are glued into place.
45. Insert the last wing spar.
Tip:
The wing can also be built on the plan. However, a line in
right angle on the building board is efficient as well. Make
sure to glue once everything is aligned.
44. Ribs are applied to the wing spar in sequence R2 – R9.
46. Rudder bars are applied to the grooves in an angle..