background image

BULB REPLACEMENT 

  CLEANING AND MAINTENANCE 

1.

To clean: use a soft, dry cloth only. 

2.

Do not use chemical or abrasive cleaning solutions.

Made in China

  For Customer Assistance:

www.jalexanderhome.com

Read and Save:

ASSEMBLY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

       

MODEL #: JAE318

JAE318-T20 (INTEGRATED LED)

TABLE LAMP  

Integrated LED bulb replacement not required.

1. Place 

the base on a flat surface.

2. 

Insert the plug into an electrical outlet.

3. Use the 3 way touch switch on the base to adjust the 

brightness to meet your needs. Touch Switch with Three 

Step Dimming Low, Medium, High, and Off.

1. Do not use the lamp in high-temperature or high humidity 

environments. This product is NOT waterproof.

2.

 

Do not disassemble the product. Altering or modifying the 

lamp in any way will render the product unsafe.

3. 

To prevent bad connections, avoid pulling wiring 

connections when removing contents from package 

or during installation.

4. This lamp is approved for indoor use only. Do not keep 

close to windows or direct sunlight.

5. Unplug the lamp fixture if it is not being used for extended

periods of time.

6. This lamp has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by 

turning the equipment on and off, the user is encouraged to 

try to correct the interference by one or more of the following: 

Reorient or relocate the receiving antenna.

Increase the separation between the lighting unit and receiver.

Connect the lighting unit into an outlet on a circuit other than 

the outlet which the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for 

assistance.

7. The lamp fixture is not designed to support, additional 

weight. Do not hang any object from any part of lamp.

8. Do not look at the LED light source directly.

3 way touch 

switch

Отзывы: