background image

Press SET button to choose function.
All messages are shown on LCD display, on the front panel.

VOLUME DEMO – use buttons DOWN / UP to set demonstration volume
VOUME VOICE – use buttons DOWN / UP to set voice volume
VOLUME MUSIC – use buttons DOWN / UP to set music volume
VOLUME ALARM – use buttons DOWN / UP to set alarm volume
VOLUME WIN – use buttons DOWN / UP to set winning sound volume
VOLUME MP3 – use buttons DOWN / UP to set volume mp3 (up, down)
BASS MP3 – use buttons DOWN / UP to choose more or less bass line
TREBLE MP 3 - use buttons DOWN / UP to choose more or less trebles

Electronic Counter:

IN1: not possible to cancel  – quantity of credits from the beginning
IN2: possible to cancel (by pressing buttons DOWN / UP) - quantity of credits after last cancellation

OUT1: quantity of wins (big prizes)
OUT2: quantity of wins (small prizes)
Not possible to cancel

CREDITS SETTINGS – FOR COIN AND BILL ACCEPTORS

Example - € (eur) coins, 
We want the machine work with 0,50/1/2 € coins, and 5/10/20 € bills,
and counters will count money 1:1
0,50 € = 0,50 credit
1 € = 1 credit
2 € = 3 credits
5 € = 6 credits
10 € = 12 credits
20 € = 25 credits 

For coins:
COIN CHN1: 0,50
Credits: 0,50

COIN CHN2: 1
Credits: 1

COIN CHN3: 2
Credits: 3

For bills:
BANK CHN1: 5
Credits: 6

BANKCHN2: 10
Credits: 12

BANK CHN3: 20
Credits: 25

Use buttons DOWN / UP to change value of coin and number of credits
Use button SET to move between channels (1 - 4) and Credits
The arrow means which position you can change at the moment
There are 4 channels for coin acceptor: COIN CHN2, COIN CHN3, COIN CHN4;
and for bill acceptor: BANK CHN1, BANK CHN2, BANK CHN3, BANK CHN4

Содержание SPEED HUNTER









Отзывы: