After pressing GO button half-automatical calibration test starts. Every move
of the rod going towards every hole and towards its starting position has to
be confirmed by pressing GO button.
2) After finished calibration test on the display placed on the control panel will
appear a message:
CALIBRATION TEST OK
3) Turn of the device, unplugging it from the socket, and turn on again.
GIVE BALL BEFORE GAME OR NOT
–
use DOWN / UP buttons to decide whether
the machine will give a capsule before the game or not
VI HOW TO PUT PRIZES ON PRIZE ARMS CORRECTLY
1.
To put the prize on prize arm,
unscrew the locking pin from the spiral
by turning it in a clockwise direction.
2. To make putting prizes easier, fit the
locking pin to the prize arm and define,
above which loop a colorful sticker will be
placed.
3. Put prizes on appropriate loops, starting from this one, which should fall on the
end. Remember that the first prize should be placed on the first loop of the spiral,
marked by colorful sticker, counting from the beginning, and the next have to be
placed two loops further
–
exactly in spaces marked by colorful stickers.
