jakar ANGRY PUCK, Руководство оператора

Страница: 7 / 8

If on the canal 1 (CH1) there is a value «1» and if on the impuls (CREDIT) there is a value «1»
→
one
1€ coin is worth 1 credit.
Value of coins on the particular canals and number of impulses you can change by pressing middle
and bottom buttons. By pressing upper button you can navigate through next canals. An arrow on the
display informs, which parameter is changeable in particular moment. Analogically you set options
COIN CH2 , COIN CH3 , COIN CH4 .
2) for banknotes (analogically like coin settings):
BANK CH1 , BANK CH2 , BANK CH3 , BANK CH4 .
REMAINING SETTINGS
FREE PLAY (ON / OFF) – free play mode (active / disactive);
TICKET DISPENSER – ticket dispenser settings.
VII ADVANCED SETUP
To enter the advanced setup there have to be 0 credits on the machine. To enter this setup, press
middle and bottom buttons simultaneously. To choose an option, press upper button. Pressing middle
and bottom buttons, you can change options parameters.
MENU DEFAULT SETTINGS SCOPE
GAME TIME
(time of the game)
240 SECONDS 30 – 1200 SECONDS
MAX GOALS PER
(number of goals during particular game)
50 1 – 50
EXTRA TIME
(a play-off after dead-heat)
120 SECONDS
0 – 240 SECONDS
0 SECONDS = OFF
SPEED MOTOR
(power of the blower)
65 % 0 – 99%
COMMENTARY AFTER GOAL
(a voice message after goal)
AFTER 3 GOALS 0 – 10 GOALS
TIME PRESENTATION
(time of device presentation)
AFTER 5 MINUTES 0 – 60 MINUTES
BLOWER COOLING TIME
(time of cooling the playfield)
AFTER 5 MINUTES 0 – 60 MINUTES
ACTIVE AFTER GAME COOLING
(how long the blower should work when the
game is already finished)
15 SECONDS 0-999 SECONDS
SENSOR – TYPE
(a type of the sensor)
REFLECTIVE
REFLECTIVE
OPTO (disactive)
RESET FACTORY SETTINGS
(removal to default settings)
SENSOR – TEST
(a test of goals sensor)
S1: OFF
S2: OFF
OFF / ON
MOTOR A – TEST
(a test of motor 1)
MOTOR A: ON ON / OFF
MOTOR B – TEST
(a test of motor 2)
MOTOR В : ON ON / OFF
BLOW – TEST
(a test of the blower)
OFF OFF / ON
POWER OFF
(turn off the device to save changes)
To exit the advanced setup, please turn off and turn on the device again or go into primary setup by
pressing and holding the upper button.