jakar ANGRY PUCK, Руководство оператора

Страница: 5 / 8

IV HOW TO PROPERLY USE THE DEVICE
•
Turn the adjustable leg bolts to make the machine leveled.
•
The machine should be protected well to avoid any damages, which can occur during the
transport – it should be well packed. Do not shake or drop the machine while transporting.
•
To provide a proper work of the machine, check air holes periodically to ensure that they are
not filled with dirt, leaves, trash etc.
•
Do not use any sharp objects on the playfield.
•
Keep playfield always clean, smooth and dust free to avoid dirt in small holes.
•
To clean the table surface use a polishing spray/wax and a soft dry cloth.
•
Do not apply amonia based products to clean the table like liquids to clean windows/glass.
•
Polishing spray/wax is provided by producer and it is inside the mallet kit. If you need to order
more, contact Jakar.
•
To keep the machine in good condition you should clean and polish the table surface with
polishing spray/wax regularly – once a week .
•
If there is a ERROR1 on the display, which means lack of the puck in the dispenser, you
should insert the puck to one of dispensers.
V A SCHEME OF ELECTRONIC BOARD
VI PRIMARY SETUP
To enter the primary setup there have to be 0
credits in the machine. After pressing upper
button and holding it for about 5 seconds, you
can navigate through options. Pressing middle
and bottom buttons, you can change options
parameters. After about 10 seconds there will be
an automatical exit of the primary setup.
SOUND SETTINGS
VOLUME DEMO ( – /+) – volume of sounds in demo mode;
VOLUME VOICE ( – /+) – volume of voice messages;
VOLUME MUSIC ( – /+) – volume of music;
BASS MP3 ( – /+) – intensity of bass sounds;
TREBLE MP3 ( – /+) – intensity of soprano sounds.
ELECTRONIC COUNTER SETTINGS
IN1 – number of credits from the beginning of working the device (non-removeable);
IN2 – number of credits from the moment of last removal (removeable by pressing UP and DOWN).
CREDITS SETTINGS
COIN CH1, COIN CH2 , COIN CH3 , COIN CH4 – coin acceptor options;
BANK CH1 , BANK CH2 , BANK CH3 , BANK CH4 – banknote acceptor options.
1) for coins (an example in €):
COIN CH1 > 1, CREDIT – 1