JAI TS-1327EN Series, Руководство пользователя

Страница: 45 / 64

Camera Features 35
EN Camera Series
information). Normally, gain would be manually adjusted only when a different gain (and electronic
shutter setting) is needed to see the vehicle and focusing targets used for setup in whatever road
lighting is available at the installation site.
The following table shows the gain setting against the actual gain (dB): Gain Table (BW EN Camera)
Table 7 Gain Table (BW EN Camera)
TS-2030EN/TS-2076EN TS-1327EN
Gain Value dB Gain Value dB
0 7.6 0 10
36 9.9 100 14.3
60 11.4 205 19
83 12.9 255 21
112 14.9
143 16.8
176 18.9
200 20.5
230 22.4
255 24.0
Note: Gain Value is Gain entry in camera LUT after calibration.
Table 8 Gain Table (Color EN Camera)
TSC-2030EN/TSC-2076EN TSC-1327EN
Gain Value dB Gain Value dB
0 11.8 0 10
22 13.4 72 14.3
46 15.1 148 19
74 17.0 230 24.3
105 19.2 255 27
140 21.7
165 23.4
192 25.5
226 27.8
255 27.7
Note: Gain Value is Gain entry in camera LUT after calibration.
When the EN camera is controlled by a light sensor, user can monitor the gain value in the EN setup
software by accessing "Camera Gain" status register (Address = 232). This Gain value is the Gain
Table Entry in LUT after calibration (left side of the table above).