JAI TM-6740GE, Руководство по эксплуатации

Страница: 19 / 80

Page 7
Connectors
TM-6740GE Software
FIGURE 7.
HR10A-10R-12P
2.2 Ethernet
The GigE socket, marked on the camera’s back panel as “GigE,” is a standard RJ-45 Ethernet socket.
Use at least cat5e UTP cables (Cat6 cables are preferred). If you wish to connect the camera directly to
a PC, a cross-over cable must be used. See the Cam2Net User's Manual for details.
1
FIGURE 8. Ethernet GigE Socket
2.3 Product Description
The PULNiX TM-6740GE camera is a dual-tap output, high-speed progressive scan CCD camera. The
interline-type CCD permits full vertical and horizontal resolution of very high speed shutter images and
applications. The electronic shutter, which has speeds to 1/64,000 sec., can be reset asynchronously by
external pulse control. The frame rate for a full image is 200 fps, with partial scan mode of up to 3205
fps. A 4:3 ratio imager format with uniform square pixels provides superior image definition in any
orientation. On-chip micro lenses provide increased sensitivity.
The TM-6740GE has a full dynamic range control function, which can be set at externally selectable
look-up table (LUT) knee slopes to convert 10-bit input to 8-bit output, thereby optimizing the CCD’s
full dynamic range in the normal output signal range. As a Gigabit Ethernet output camera, the TM-
6740GE has semi-auto-gain balancing functions.
1. JAI PULNiX recommends the use of shielded cables to reduce emissions and for CE/FCC
compliance. Double-shielded cables will further reduce emissions.
1
9
2
10
8
3 11 12 7
4
5
6
GigE