— 23 —
SP-12000M-CXP4 / SP-12000C-CXP4
Step 7: Saving the Settings
Setting values configured in Control Tool are maintained in the camera’s temporary memory until the
camera is turned off. By saving current setting values to user memory, you can load and recall them
whenever necessary. You can save up to three sets of user settings on the camera.
User memory
Temporary memory
Current
setting
values
Control Tool
Save
User Set1
User Set2
User Set3
Note
The setting values are not saved to the computer (Control Tool). The setting values will be stored in the camera’s
temporary memory until the camera is turned off.
■
To save user settings
1
Stop image acquisition.
2
Expand [User Set Control], and select the save destination ([User Set1] to [User Set3]) in
[User Set Selector].
Note
The factory default setting values are maintained in [Default] and cannot be overwritten.
Caution
Settings can only be saved when image acquisition on the camera is stopped.
