JAI LT-200CL Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 65

JAI LT-200CL Скачать руководство пользователя страница 46

LT-200CL

45

8.20 Command LR - Line Rate (Scan Rate)

This function is used only when there is no external trigger pulse (e.g. from an
encoder) available. It allows the user to program the line rate, in order to match the
speed of the object being scanned. In the No-Shutter mode, the exposure time is
directly proportional to the line rate (T

exp

= 1/line rate)

Settings:

2633 to 1347584,

32.9125μs to 16.844ms in 12.5ns increments

Associated functions:

Trigger origin, TG=0

Applicable modes:

No-Shutter with internal line rate generator

(TR=0)

Shutter-Select with internal line rate generator (TR=1)

Important note



The data can be stored in the camera memory for next start up.

Refer to chapter

6.3.1 Line rate (Command LR)

for further details

8.21 Command NR – Noise reduction

This command activates noise reduction circuit.

Settings:

0=OFF, 1=ON

8.22 Command PBC – Select pixel black correction mode

This command enables (or disables) the “pixel black level” correction function, which
compensates for Dark Signal Non Uniformity (DSNU / FPN) for individual pixels.

Settings:

0 = Off (Bypass)
1 = Factory setting
2 = user area

Associated functions:

Command PBR

Applicable modes:

All

8.23 Command PBR – Run pixel black correction and store to user area

This command initiates the “pixel black level” correction function, and stores the
settings in the user area. When this function is activated, lens must be capped.

Settings:

0 = Run this function

Associated functions:

Command PBC must be set to 2

Important note:



This function requires that no light reaches the image sensors. The lens must
therefore be covered by a lens cap, or put the F-mount protective cover on the
camera, when executing this function.



As the black level is influenced by the exposure time (especially for long exposure
time, at slow scan rates) it is recommended to perform the pixel black correction at
the exposure time and line rate at which the camera will be operated.

«
...
44
45
46
47
48
...
»

Содержание LT-200CL


































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды