User Manual (Ver. 1.0) - Setting List
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
- 139 -
Pulse Generator Item
Setting Range
Default Value
Description
PulseGeneratorEndPoint
1 ~ 1048575
12500
Set the start point of the Low interval as a clock count.
When the counter reaches this value, the output will be
0.
PulseGeneratorEndPointMs
(ms)
-
50
Set the start point of the Low interval in milliseconds.
When the counter reaches this value, the output will be
0. The setting range varies depending on the
ClockPreScaler value.
PulseGeneratorEndPointMs = 1/PulseGeneratorClock
* PulseGeneratorEndPoint
PulseGeneratorPulseWidth
(ms)
-
50
Display the High interval width of the pulse in
milliseconds. The duration between the Start Point and
End Point is calculated. The setting range varies
depending on the ClockPreScaler value.
PulseGeneratorPulseWidth = 1/PulseGeneratorClock
* (PulseGeneratorEndPoint -
PulseGeneratorStartPoint)
PulseGeneratorRepeat
Count
0 ~ 255
0
Set the repeat count for the counter. When this is set to
0, a free counter is enabled with no repeat limit.
PulseGeneratorClear
Activation
0: Off
1: Rising Edge
2: Falling Edge
3: Level High
4: Level Low
0: Off
Set the clear signal condition for the count clear input
of the pulse generator.
PulseGeneratorClear
Source
-
24: Line5 Opt In1
Select the count clear input signal source.
1: AcquisitionActive
2: FrameActive
4: ExposureActive
5: FVAL
7-10: PulseGenerator0-3(
※
)
11-14: UserOutput0-3
24: Line5 Opt In1
36: Nand0 Out
37: Nand1 Out
43: AcquisitionTriggerWait
44: FrameTriggerWait
Note:
(
※
)Disabled if the PulseGenerator is selected in
PUlseGeneratorSelector.
PulseGeneratorClear
SyncMode
0:Async Mode
1:Sync Mode
0:Async Mode
Select the sync mode for the count clear input signal.
