CV-M91
- 13 -
6.2.2. Edge Pre-select Mode
The exposure will start at the first HD after the trigger leading edge, and it stops after the
selected shutter time, and the resulting video is read out.
An EEN pulse indicate the accumulation time, and a WEN pulse that the resulting video read out.
Refer to “7. Configuring the Camera.”
To use this mode:
Set function:
Trigger mode to “Edge pre-select”. SW 1-4 to ON
On PK8407: JP301 open, JP302 open, JP331 short.
Factory setting.
Accumulation to “Field”. SW 301-4 to OFF
Scanning to “Non-interlaced”. SW 1-5 to ON
“Shutter Speed”. SW 1-1 through 1-3 to optimum
Other
functions
Input:
Ext. trigger to pin 5 on 6-pin connector.
Ext HD to pin 6 on 12 pin connector. (If used).
Important notes on using this mode.
•
The duration of the trigger should be >1H. (>64
µ
sec.)
•
To avoid 1H jitter it is recommended to synchronize the trigger to HD. (See fig. 11.)
•
A new trigger can not be applied before WEN is high
Fig. 19. Vertical timing for edge pre-select PAL
Fig. 20. Vertical timing for edge pre-select NTSC
Содержание CV-M91
Страница 12: ...CV M91 11 Fig 15 Vertical timing PAL interlaced Fig 16 Vertical timing PAL non interlaced Field accumulation ...
Страница 13: ...CV M91 12 Fig 17 Vertical timing NTSC interlaced Fig 18 Vertical timing NTSC non interlaced Field accumulation ...
Страница 26: ...CV M91 25 9 3 CV M91 Opto mechanical specifications Fig 43 Opto mechanical specifications ...
