JAI CM-030GE, Руководство пользователя

Страница: 48 / 69

CM-030GE/CM-030GE-RA / CB-030GE/CB-030GE-RA
- 46 -
Trigger
Sequence
operation
Sequence 1 Sequence 2 Sequence 3 Sequence 4
Trigger
CCD Exposure
1.3608ms(63L)
Full:6L ～ 7.1L(131us ～ 152.6us)
V Binning:4L ～ 5.2L(98.4us ～ 121.2L)
EEN
FVAL
DVAL
Note: When PE is set at 511 or the shutter is set at OFF, EEN is always HIGH.
Fig.32. RCT mode timing
10.2.5 Sequential Trigger Mode (Pre-Select trigger)
The ROI, Shutter and Gain values can be preset up to 10 sequences. Along with every trigger
input, the image data with the preset sequence is output as described below.
Signals added to trigger can be selected by Trigger Source. The camera will functions on the
rising edge of the trigger and Negative or Positive should be determined accordingly.
For the sequence, the following default settings are installed.
ID
ROI
Shutter Gain
Width Height
Offset
X
Offset
Y
1 656 494 0 0 511 0
2 656 494 0 0 511 0
3 656 494 0 0 511 0
4 656 494 0 0 511 0
5 656 494 0 0 511 0
6 656 494 0 0 511 0
7 656 494 0 0 511 0
8 656 494 0 0 511 0
9 656 494 0 0 511 0
10 656 494 0 0 511 0