JAI CB-030GE страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 69

background image

- 2 -

CM-030GE/CM-030GE-RA / CB-030GE/CB-030GE-RA

Notice

T

he material contained in this manual consists of information that is proprietary to JAI Ltd.,

Japan and may only be used by the purchasers of the product. JAI Ltd., Japan makes no
warranty for the use of its product and assumes no responsibility for any errors which may
appear or for damages resulting from the use of the information contained herein. JAI Ltd.,
Japan reserves the right to make changes without notice.

Company and product names mentioned in this manual are trademarks or registered
trademarks of their respective owners.

Warranty

For information about the warranty, please contact your factory representative.

Certifications

CE compliance

As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC
(Electromagnetic compatibility), JAI Ltd., Japan declares that CM-030GE, CB-030GE, CM-
030GE-RA and CB-030GE-RA comply with the following provisions applying to its standards.
EN 61000-6-3 (Generic emission standard part 1)
EN 61000-6-2 (Generic immunity standard part 1)

FCC

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable
protection  against  harmful  interference  in  a  residential  installation.    This  equipment
generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-

Consult the dealer or an experienced radio/TV technician for help.

Warning

Changes or modifications to this unit not expressly approved by the party
responsible for FCC compliance could void the user’s authority to operate the
equipment.

KC

«
1
2
3
4
...
»

Содержание CB-030GE






































































Отзывы:

Нет отзывов

Похожие инструкции для CB-030GE

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 15

DMC-TZ3A - Lumix Digital Camera

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 64

Бренд: Panasonic Страницы: 31

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 225

DMC-FX30A - Lumix Digital Camera

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 24

Бренд: Camatics Страницы: 11

Бренд: Ganz Thermal Страницы: 2

Бренд: Olympus Страницы: 148

Бренд: Q-See Страницы: 32

Бренд: GeoVision Страницы: 17

Бренд: Foscam Страницы: 79

Бренд: urmet domus Страницы: 32

Бренд: jablotron Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды