4
INSTRUCTIONS
Unpacking Instructions
1.
Start by removing the included bag of bottle stoppers and drip tray
2.
Remove foam inserts to reveal the machine
3.
Carefully remove the machine by lifting it straight up out of the box
DO NOT HOLD THE SHOTMEISTER BY THE FRONT FAUCET!
4.
Place the machine in desired location with 4 inches of clearance on all sides
5.
REMOVE PAPER PADDING
from tap spout and inner chilling chamber
6.
Before plugging in, make sure the power switch in the back is in the
OFF
position
7.
Plug in, and flip the switch to
ON
8.
Insert drip tray in the lower front side of the machine
Retain your original box and packing materials for a period of 1 year.
These items are needed if your machine requires service or repairs.
Visit
www.tapmachine.com
for information on requesting service or repairs.
Visit
www.jagercups.com
to order shot and drink cups.
Inserting a bottle
1.
It is recommended that you place a pre-chilled bottle into the Shotmeister
2.
Unscrew the bottle cap
(picture A)
and replace it with an orange bottle stopper
(picture B)
screwing it on tightly
3.
Turn the bottle upside down into the chilling chamber
(picture C)
with the bottle stopper engaging the well
(picture D)
4.
Bottle is inserted correctly when the Jägermeister begins to drain from the bottle
into the machine
5.
When closing the lid, make sure to
PRESS DOWN FIRMLY
and ensure the lid is
completely sealed
A
B
C
D
Содержание Shotmeister
Страница 1: ...Shotmeister Owner s Manual The Sleekest Design Pouring the Coldest Shots...
Страница 8: ......
